Fujitsu PRIMERGY BX900 User Manual page 597

10.6.18.4 show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Syntax
show sflow samplers
Default Setting
None
Command Mode
Privileged Exec
Display Message
Sampler Data Source: The sFlowDataSource (slot/port) for this sFlow sampler. This agent will
support Physical ports only.
Receiver Index: The sFlowReceiver configured for this sFlow sampler.
Packet Sampling Rate: The statistical sampling rate for packet sampling from this source.
Max Header Size: The maximum number of bytes that should be copied from a sampled packet to
form a flow sample.
2011 Fujitsu Technology Solutions
©
595