Fujitsu PRIMERGY BX900 User Manual page 89

9.2.2.6 SSH Client Config
Figure : SSH Client Config
Selection Criteria
Admin Mode - Specifies if the Outbound SSH service is Enabled or Disabled. Default value is
Enabled.
Maximum Sessions - Specifies the maximum number of Outbound SSH Sessions allowed. Default
value is 5. Valid Range is (0 to 5).
Configurable Data
Session Timeout - Specifies the Outbound SSH login inactivity timeout. Default value is 5. Valid
Range is (1 to 160).
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
2011 Fujitsu Technology Solutions
©
87