Fujitsu PRIMERGY BX900 User Manual page 313

CoS - Specifies the 802.1p user priority to compare against an Ethernet frame. Valid range of values
is (0 to 7).
Secondary CoS - Specifies the Secondary 802.1p user priority to compare against an Ethernet
frame. Valid range of values is (0 to 7).
Destination MAC - Specifies the destination MAC address to compare against an Ethernet frame.
Valid format is (xx:xx:xx:xx:xx:xx).
The BPDU keyword may be specified using a Destination MAC address of 01:80:C2:xx:xx:xx.
Destination MAC Mask - Specifies the destination MAC address mask specifying which bits in the
destination MAC to compare against an Ethernet frame. Valid format is (xx:xx:xx:xx:xx:xx).
The BPDU keyword may be specified using a Destination MAC mask of 00:00:00:ff:ff:ff.
Ethertype Key - Specifies the Ethertype value to compare against an Ethernet frame.
Valid values are
Appletalk
ARP
IBM SNA
IPv4
IPv6
IPX
MPLS multicast
MPLS unicast
NetBIOS
Novell
PPPoE
Reverse ARP
User Value
Ethertype User Value - Specifies the user defined customized Ethertype value to be used when the
user has selected "User Value" as Ethertype Key, to compare against an Ethernet frame. Valid
range of values is (0x0600 to 0xFFFF).
Source MAC - Specifies the Source MAC address to compare against an Ethernet frame. Valid
format is (xx:xx:xx:xx:xx:xx).
Source MAC Mask - Specifies the Source MAC address mask specifying which bits in the Source
MAC to compare against an Ethernet frame. Valid format is (xx:xx:xx:xx:xx:xx).
VLAN - Specifies the VLAN ID to compare against an Ethernet frame. Valid range of values is (0 to
4095). Either VLAN Range or VLAN can be configured.
Secondary VLAN - Specifies the Secondary VLAN ID to compare against an Ethernet frame. Valid
range of values is (0 to 4095). Either Secondary VLAN Range or Secondary VLAN can be
configured.
Match Every - Specifies an indication to match every Layer 2 MAC packet.
Valid values are
True - Signifies that every packet is considered to match the selected ACL Rule.
False - Signifies that it is not mandatory for every packet to match the selected ACL Rule.
Command Buttons
2011 Fujitsu Technology Solutions
©
311