Access to the CLI
3.2.3 Commands
When you use access via the CLI, commands are available to you which are described
briefly below.
When you enter a command (also with a function parameter or subcommand) with the -h
option, you are shown information on the syntax of the command and of the function
parameter.
It is assumed that you know how to use the Linux commands and the shell, so no
description of these is provided here. You can obtain detailed information on the commands
in the online help for the HNC Manager.
3.2.3.1
auditLog
The auditLog command manages the log files of the audit log function which logs every
action (configuration or status change) which is performed on the HNC via the Web
interface or by means of a CLI command.
3.2.3.2
cli_info
The cli_info command displays the commands available on the CLI.
3.2.3.3
hnc_state
The hnc_state command displays the current status of the communication channel to
BS2000 and of the devices.
3.2.3.4
init
The init command shuts down the HNC and switches it off or executes a reboot.
32
Operating the HNC
U41655-J-Z125-5-74