Fujitsu PRIMERGY BX900 User Manual page 733

10.16.8.4 dos-control icmpv6
This command enables Maximum ICMPv6 Packet Size Denial of Service protections. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If ICMPv6 Echo Request (PING)
packets ingress having a size greater than the configured value, the packets will be dropped if the mode is
enabled.
Syntax
dos-control icmpv6 <0-1023>
no dos-control icmpv6
<0-1023> - Configures maximum ICMPv6 packet size.
no - This command disables Maximum ICMPv6 Packet Size Denial of Service protections.
Default Setting
Disabled <512>
Command Mode
Global Config
10.16.8.5 dos-control l4port
This command enables L4 Port Denial of Service protections. If the mode is enabled, Denial of Service
prevention is active for this type of attack. If packets ingress having Source TCP/UDP Port Number equal
to Destination TCP/UDP Port Number, the packets will be dropped if the mode is enabled.
Syntax
dos-control l4port
no dos-control l4port
no -
This command disables L4 Port Denial of Service protections.
Default Setting
Disabled
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
731