Fujitsu PRIMERGY BX900 User Manual page 139

9.2.8.7 Trap Log
This screen lists the entries in the trap log. The information can be retrieved as a file by using System
Utilities, Upload File from Switch.
Figure : SNMP Trap Log
Non-Configurable Data
Number of Traps Since Last Reset - The number of traps generated since the trap log entries were
last cleared.
Trap Log Capacity - The maximum number of traps stored in the log. If the number of traps exceeds
the capacity, the entries will overwrite the oldest entries.
Number of Traps since log last viewed - The number of traps that have occurred since the traps
were last displayed. Displaying the traps by any method (terminal interface display, Web display,
upload file from switch etc.) will cause this counter to be cleared to 0.
Log - The sequence number of this trap.
System Up Time - The time at which this trap occurred, expressed in days, hours, minutes and
seconds since the last reboot of the switch.
Trap - Information identifying the trap.
Command Buttons
Clear Log - Clear all entries in the log. Subsequent displays of the log will only show new log entries.
2011 Fujitsu Technology Solutions
©
137