Fujitsu PRIMERGY BX900 User Manual page 457

10.4.8.1.5 show ipv6 mld snooping static
The user can go to the Privilege Mode to display MLD snooping static information, use the show ipv6
mld snooping static Privilege command.
Syntax
show ipv6 mld snooping static
Default Setting
None
Command Mode
Privilege Exec, User Exec
Display Message
VLAN: The VLAN ID used with the MAC address to fully identify packets you want L2Mcast Group.
MAC Address: The MAC address of the L2Mcast Group in the format 33:33:xx:xx:xx:xx.
Port: List the ports you want included into L2Mcast Group.
State: The active interface number belongs to this Multicast Group.
10.4.8.1.6 show mac-address-table mldsnooping
The user can go to the CLI Privilege Mode to display the MLD Snooping entries in the Multicast
Forwarding Database (MFDB) table, use the show mac-address-table mldsnooping Privilege
command.
Syntax
show mac-address-table mldsnooping
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: A multicast MAC address for which the switch has forwarding or filtering information.
The format is two-digit hexadecimal numbers that are separated by colons, for example
33:33:45:67:89:AB.
Type: The type of entry, which is either static (added by the user) or dynamic (added to the table as
a result of a learning process or protocol.)
Description: The text description of this multicast table entry.
Interfaces: The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
2011 Fujitsu Technology Solutions
©
455