Fujitsu PRIMERGY BX900 User Manual page 294

9.4.3.3 Accounting Server Config
Figure : RADIUS Accounting Server Config
Selection Criteria
Accounting Server - Selects the accounting server for which data is to be displayed or configured. If
the add item is selected, a new accounting server can be configured.
Configurable Data
IP Address - The IPv4 address of the accounting server to add. This field is only configurable if the
add item is selected.
You cannot define these IPv4 addresses:
0.0.0.0
255.255.255.255
224.xxx.xxx.xxx
127.0.0.1
IPv6 Address - - The IPv6 address of the server being added.
You cannot define these IPv6 addresses:
0::0 (Unspecified)
0::1 (Loopback)
Multicast
Host Name -The host name of the server being added.
Port - Specifies the UDP Port to be used by the accounting server. The valid range is 0 - 65535. If
the user has READONLY access, the value is displayed but cannot be changed.
Secret - Specifies the shared secret to use with the specified accounting server. This field is only
displayed if the user has READWRITE access.
Apply - The Secret will only be applied if this box is checked. If the box is not checked, anything
entered in the Secret field will have no affect and will not be retained. This field is only displayed if
the user has READWRITE access.
Encrypted - When the secret string is encrypted, this box need to be checked. This field is only
displayed if the user has READWRITE access.
Non-Configurable Data
Secret Configured - Indicates if the secret has been configured for this accounting server.
2011 Fujitsu Technology Solutions
©
292