Fujitsu PRIMERGY BX900 User Manual page 183

9.3.1.2 Search
Use this panel to display information about entries in the forwarding database. These entries are used by
the transparent bridging function to determine how to forward a received frame.
Figure : Forwarding Database Search
Selection Criteria
Management Unit - Displays management unit for which Forwarding Database Table is to be
displayed. (This attribute is provided in stackable Ethernet Connection Blade)
Filter - Specify the entries you want displayed.
Learned: If you choose "learned" only MAC addresses that have been learned will be
displayed.
All: If you choose "all" the whole table will be displayed.
Configurable Data
MAC Address Search - You may also search for an individual MAC address. Enter the two byte
hexadecimal VLAN ID followed by the six byte hexadecimal MAC address in two-digit groups
separated by colons, for example 01:23:45:67:89:AB:CD:EF where 01:23 is the VLAN ID and
45:67:89:AB:CD:EF is the MAC address. Then click on the search button. If the address exists, that
entry will be displayed as the first entry followed by the remaining (greater) MAC addresses. An
exact match is required.
Non-Configurable Data
MAC Address - A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is a two byte hexadecimal VLAN ID number followed by a six byte MAC
address with each byte separated by colons. For example: 01:23:45:67:89:AB:CD:EF, where 01:23
is the VLAN ID and 45:67:89:AB:CD:EF is the MAC address.
Source Port - the port where this address was learned -- i.e. the port through which the MAC
address can be reached.
ifIndex - The ifIndex of the MIB interface table entry associated with the source port.
Status - The status of this entry. The possible values are:
Static: the entry was added when a static MAC filter was defined.
2011 Fujitsu Technology Solutions
©
181