Fujitsu PRIMERGY BX900 User Manual page 200

IP - IP is a network layer protocol that provides a connectionless service for the delivery of
data.
ARP - Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps
network layer addresses to physical medium access control (MAC) addresses
IPX - The Internetwork Packet Exchange (IPX) is a connectionless datagram Network-layer
protocol that forwards data over a network.
VLAN - VLAN can be any number in the range of (1 to 4093) . All the ports in the group will assign
this VLAN ID to untagged packets received for the protocols you included in this group.
Unit/Slot/Port(s) - Select the interface(s) you want to be included in the group. Note that a given
interface can only belong to one group for a given protocol. If you have already added interface 0.1
to a group for IP, you cannot add it to another group that also includes IP, although you could add it
to a new group for IPX.
Non-Configurable Data
Group ID - A number used to identify the group created by the user. Group IDs are automatically
assigned when a group is created by the user.
Command Buttons
Apply - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete - Remove the Protocol Based VLAN group identified by the value in the Group ID field. If you
want the switch to retain the deletion across a power cycle, you must perform a save.
2011 Fujitsu Technology Solutions
©
198