Procedure C: Restore The System Configuration From The Backup - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
7 Click OK.
8 Remove the USB key from the PC.
9 Insert the USB key in any USB port of the RealPresence Collaboration Server 800s.
10 Turn off the RealPresence Collaboration Server 800s, then turn it On.
11 Start the Collaboration Server Web Client application on the workstation.
a In the browser's address line, enter the IP address of the Control Unit in the following format:
http://<Control Unit IP Address>,
as defined in the USB key. If no Control Unit IP Address was defined, the IP address will be
192.168.1.254.
b Click Enter.
When the Collaboration Server Web Client Login window is displayed, the system was successfully
restored to factory defaults.
12 Optional. Restore the system using
Backup on page 877 below.

Procedure C: Restore the System Configuration From the Backup

To restore configuration files:
1 On the Collaboration Server Menu, click Administration > Software Management > Restore
Configuration.
2 Browse to the Restore Directory Path where the backed up configuration files are stored.
3 Click the Restore button.
4 When the Restore is complete, restart the RealPresence Collaboration Server 800s.
RealPresence Collaboration Server 800s system settings, with the exception of User data, are
restored.
5 Restore User data by repeating step
Polycom®, Inc.
Procedure C: Restore the System Configuration From the
to step of this procedure.
1 3
877