Disconnecting An Mcu; Removing An Mcu From The Mcus Pane - Polycom RealPresence 1500 Administrator's Manual

a Select the MCU to disconnect and click MCU Properties
b Right-click the MCU icon and then click MCU Properties.
The MCU Properties dialog box opens.
2 Define/modify the required parameters. For details, see
3 Click OK.

Disconnecting an MCU

An MCU can be disconnected from the RMX Manager, without removing it from the MCUs list.
To disconnect an MCU:
1 Use one of the following methods:
a Select the MCU to disconnect and click Disconnect MCU
b Right-click the MCU icon and then click Disconnect MCU.
The MCU icon changes to disconnected and any ongoing conference running on that MCU will not
be monitored in this RMX Manager; they are removed from the Conferences pane. This MCU can
still be monitored and controlled by other users.

Removing an MCU from the MCUs Pane

An MCU can be removed from the RMX Manager. This function should be used if the MCU hardware was
disconnected and removed from the network.
To Remove an MCU from the list:
1 Use one of the following methods:
a Select the MCU to disconnect and click Delete
b Right-click the MCU icon and then click Remove MCU.
Polycom®, Inc.
RMX Manager Application
.
MCU Properties.
.
.
661