Ethernet Settings - Polycom RealPresence RMX 1500 Administrator's Manual

When updating the parameters of the SIP Server in the IP Network Service - SIP Servers dialog
box, the Collaboration Server must be reset to implement the change.

Ethernet Settings

The automatically identified speed and transmit/receive mode of each LAN port used by the system can be
manually modified if a specific switch requires it. These settings can be modified in the Ethernet Settings
dialog box.
RealPresence Collaboration Server (RMX) 1500: The Port numbers displayed in the dialog box
do not reflect the physical Port numbers as labeled on the RealPresence Collaboration Server
(RMX) 1500.
The following table lists the physical mapping of Port Type to the physical label on the back panel of the
RealPresence Collaboration Server (RMX) 1500.
Physical Mapping - Port Type to Label on RealPresence Collaboration Server 1500/4000
Port Type
Media
Modem
Management 1
Signaling 1
ShM
Polycom, Inc.
Label on MCU
1500
LAN 2
Modem
MNG B
MNG
Shelf
4000
LAN 2
LAN 1
LAN 2
LAN 3
LAN 6
IP Network Services
RTM LAN Card
RTM-IP 4000 Card
502