Table of Contents
Advertisement
MBM-GEM-004 Switch Web User Guide
4.7.4 RSTP Port Status
The Port Status link opens the RSTP Port Status page.
This page displays RSTP port specific information. You need to configure the following:
Port – Port number.
Designated Root: Specifies the unique Bridge Identifier of the Bridge recorded as the Root for
the segment to which the port is attached.
Designated Cost: Specifies the path cost of the Designated Port of the segment connected to
this port.
Designated Bridge: Specifies the Bridge Identifier of the bridge, which this port considers to be
the Designated Bridge for this port's segment.
Designated Port: Specifies the Port Identifier of the port on the Designated Bridge for this port's
segment.
Type: Specifies the operational point-to-point status of the LAN segment attached to this port. It
indicates whether a port is considered to have a point-to-point connection or Shared media.
Role: Specifies the Port's Current Role as defined by Spanning Tree Protocol.
Port State: The port's current state as defined by application of the Spanning Tree Protocol.
Fig: RSTP Port Status
Release: 1.0
91 / 164
Advertisement
Table of Contents
