Status Leds - Supermicro SSE-G3648B Installation Manual

SSE-G3648B/BR Switch Installation Guide
Fig 1-4: Back panel of SSE-G3648B/BR
(with Second Power Supply Installed)

Status LEDs

The indicator light on front panel of the SSE-G3648B/BR has forty-eight RJ45 port indicator
lights, four SFP+ port indicator lights, two power supply indicator lights and a system automatic
diagnostics LED. They are shown below and described in the following table.
Table 1-2: Explanation of Indicator Light of SSE-G3648B/BR Switch
Indicator Light Panel
Sign
Power Supply
P-1 / P-2
Indicator Light
System Automatic
STAT
Diagnostic LED
Work Mode
MAST
Indicator Light
State
Green light always on
Amber light always on
No light
Green light always on
Green light blinks
Green light always on
Amber light always on
Page 7
Meanings
Power supply module move normally
Power fault
No power supply
System running normally
System booting
Master mode
Slave mode