Clear Santap Module - Cisco MDS 9124 - Fabric Switch Reference

clear santap module

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear santap module
To clear SANTap information, use the clear santap module command.
Syntax Description
slot-number
avt avt-pwwn
lun avt-lun
itl target-pwwn
host-pwwn
session session-id
Defaults None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example shows how to remove a SANTap session.
switch# clear santap module 13 session 2020
Related Commands Command
santap module
show santap module
Cisco MDS 9000 Family Command Reference
4-80
clear santap module slot-number {avt avt-pwwn [lun avt-lun] |
itl target-pwwn host-pwwn |
session session-id}
Specifies the Storage Services Module (SSM) module number. The range is
1 through 13.
Removes the appliance virtual target (AVT) pWWN. The format is
hh:hh:hh:hh:hh:hh:hh:hh.
Removes the appliance virtual target (AVT) LUN. The format is
0xhhhh[:hhhh[:hhhh[:hhhh]]].
Removes the SANTap Initiator Target LUN (ITL) triplet. The format of the
target-pwwn and the host-pwwn is hh:hh:hh:hh:hh:hh:hh:hh.
Removes a session. The range for session ID is 0 through 2147483647
Modification
This command was introduced.
Description
Configures the mapping between the Storage Services Module (SSM) and
the VSAN where the appliance is configured.
Displays the configuration and statistics of the SANTap feature.
Chapter 4
OL-16217-01, Cisco MDS SAN-OS Release 3.x
C Commands