Clear Sdv - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear sdv

To clear specified SAN device virtualization parameters, use the clear sdv command in EXEC mode.
Syntax Description
database
vsan vsan-id
session
statistics
Defaults None.
Command Modes EXEC mode.
Command History Release
3.1(2)
Usage Guidelines
None.
Examples The following example shows how to clear SDV statistics.
switch# clear sdv statistics vsan 2
Related Commands Command
sdv enable
show sdv statistics
OL-16217-01, Cisco MDS SAN-OS Release 3.x
clear sdv {database vsan vsan-id | session vsan vsan-id | statistics vsan vsan-id}
Clears the SDV database.
Specifies the number of the VSAN. The range is 1 to 4093.
Clears the SDV session.
Clears the SDV statistics.
Modification
This command was introduced.
Description
Enables or disables SAN device virtualization.
Displays SAN device virtualization statistics.
Cisco MDS 9000 Family Command Reference
clear sdv
4-85