iSCSI QoS Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
32.0
32.1 iscsi enable
To enable applying the quality of service profile to Internet Small Computer
System Interface (iSCSI) flows, use the iscsi enable command in Global
Configuration mode. To restore the default configuration, use the no form of the
command.
Syntax
iscsi enable
no iscsi enable
Parameters
This command has no arguments or keywords
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
Use the iscsi enable command to enable the iSCSI QoS.
If an ACL is bounded on an interface and a frame matches both to the iSCLI and
the ACL rules then only the iSCSI rules are applied to this frame.
32
736