Callhome Test - Cisco MDS 9124 - Fabric Switch Reference

callhome test

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
callhome test
To simulate a CallHome message generation, use the callhome test command.
Syntax Description
inventory
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines You can simulate a message generation by issuing a callhome test command.
Examples The following example sends a test message to the configured destination(s):
switch# callhome test
trying to send test callhome message
successfully sent test callhome message
The following example sends a test inventory message to the configured destination(s)
switch# callhome test inventory
trying to send test callhome message
successfully sent test callhome message
Related Commands Command
callhome
show callhome
Cisco MDS 9000 Family Command Reference
4-4
callhome test [inventory]
Sends a dummy CallHome inventory.
Modification
This command was introduced.
Description
Configures Call Home functions.
Displays configured Call Home information.
Chapter 4
OL-16217-01, Cisco MDS SAN-OS Release 3.x
C Commands