Channel Mode Active - Cisco MDS 9124 - Fabric Switch Reference

channel mode active

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
channel mode active
To enable channel mode on a PortChannel interface, use the channel mode active command. To disable
this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes Interface configuration submode.
Command History Release
2.0(x)
Usage Guidelines
This command determines the protocol behavior for all the member ports in the channel group associated
with the port channel interface.
Examples The following example shows how to disable channel mode on a PortChannel interface.
switch# config terminal
switch(config)# interface port-channel 10
switch(config-if)# no channel mode active
Related Commands Command
show interface port-channel
Cisco MDS 9000 Family Command Reference
4-20
channel mode active
no channel mode
Modification
This command was introduced.
Description
Displays PortChannel interface information.
Chapter 4
OL-16217-01, Cisco MDS SAN-OS Release 3.x
C Commands