Chapter 4 C Command - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch# config terminal
config terminal
switch# snmp-server contact personname@companyname.com
switch(config)# callhome
switch(config-callhome)# email-contact username@company.com
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)# streetaddress 1234 Picaboo Street, Any city, Any state, 12345
switch(config-callhome)# switch-priority 0
switch(config-callhome)# customer-id Customer1234
switch(config-callhome)# site-id Site1ManhattanNY
switch(config-callhome)# contract-id Company1234
The following example configures a user-defined show command for an alert-group license:
switch(config-callhome)# alert-group license user-def-cmd "show license usage"
The show command must be enclosed in double quotes.
Note
The following example removes a user-defined show command for an alert-group license:
switch(config-callhome)# no alert-group license user-def-cmd "show license usage"
Related Commands Command
alert-group
callhome test
show callhome
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Description
Customizes a CallHome alert group with user-defined show commands.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
Cisco MDS 9000 Family Command Reference
callhome
4-3