Bport; Bport-Keepalive - Cisco MDS 9124 - Fabric Switch Reference

Chapter 3 B Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

bport-keepalive

To configure keepalive responses for B port FCIP interfaces, use the bport-keepalive option. To disable
keepalive responses for B port FCIP interfaces, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled
Command Modes Interface configuration submode
Command History Release
1.1(1)
Usage Guidelines
Access this command from the
Examples
The following example shows how to configure keepalive responses for B port FCIP interfaces.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport-keepalives
Related Commands Command
show interface fcip

bport

OL-16217-01, Cisco MDS SAN-OS Release 3.x
bport-keepalive
no bport-keepalive
Modification
This command was introduced.
Description
Displays an interface configuration for a specified FCIP interface.
Configures a B port FCIP interface.
submode.
switch(config-if)#
Cisco MDS 9000 Family Command Reference
bport-keepalive
3-7