Cisco MDS 9124 - Fabric Switch Reference page 152

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)
Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:
Table of Contents

Advertisement

bport
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
bport
To configure a B port mode on a FCIP interface, use the bport option. To disable a B port mode on a
FCIP interface, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Interface configuration submode.
Command History
Release
1.1(1)
Usage Guidelines
Access this command from the
Examples
The following example shows how to configure a B port mode on an FCIP interface.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport
Related Commands
Command
show interface fcip
bport-keepalive
Cisco MDS 9000 Family Command Reference
3-6
bport
no bport
Modification
This command was introduced.
Description
Displays an interface configuration for a specified FCIP interface.
Configures B port keepalive responses.
submode.
switch(config-if)#
Chapter 3
B Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x

Advertisement

Table of Contents
loading

Table of Contents