Cisco MDS 9124 - Fabric Switch Reference page 150

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)
Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:
Table of Contents

Advertisement

boot
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
boot
To perform operations on the system, use the boot command in configuration mode. To negate this
feature or return to factory defaults, use the no form of the command.
Syntax Description
asm-sfn
module slot-number
auto-copy
kickstart
lasilc
ssi
system
bootflash:
slot0:
tftp:
image
sup-1
sup-2
Defaults
Disabled.
The default state for auto-copy is enabled.
Command Modes
Configuration mode.
Command History
Release
1.2(2)
3.0(1)
Usage Guidelines
The boot kickstart slot0:image command is currently not allowed. For kickstart, only bootflash: is
allowed.
Cisco MDS 9000 Family Command Reference
3-4
boot {asm-sfn {bootflash: | slot0: | tftp:}[image] [module [slot-number]] |
auto-copy |
kickstart {bootflash: | slot0: | tftp:}[image] [sup-1 [sup-2] | sup-2] |
lasilc {bootflash: | slot0: | tftp:}[image] [module [slot-number]] |
ssi {bootflash: | slot0:} |
system {bootflash: | slot0: | tftp:}[image] [sup-1 [sup-2] | sup-2]}
no boot {asm-sfn | auto-copy | kickstart | lasilc | system}
Configures the virtualization image.
Specifies the slot number of the SSM.
Configures auto-copying of boot variable images.
Configures the kickstart image.
Configures the boot image.
Configures the SSI image.
Configures the system image.
Specifies system image URI for bootflash.
Specifies system image URI for slot 0.
Specifies system image URI for TFTP.
Specifies the image file name.
The upper supervisor.
The lower supervisor.
Modification
This command was introduced
Changed the default state for auto-copy to enabled.
Chapter 3
B Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x

Advertisement

Table of Contents
loading

Table of Contents