Chapter 2 Catalyst 3550 Switch Cisco Io Command; Aaa Accounting Dot1X - Cisco Catalyst 3550 Command Reference Manual

aaa accounting dot1x

Defaults AAA accounting is disabled.
Command Modes Global configuration
Command History Release
12.2(20)SE
Usage Guidelines This command requires access to a RADIUS server.
We recommend that you enter the dot1x reauthentication interface configuration command before
Note
configuring IEEE 802.1x RADIUS accounting on an interface.
Examples This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa accounting dot1x default start-stop group radius
Switch(config)#
The RADIUS authentication server must be properly configured to accept and log update or watchdog
Note
packets from the AAA client.
Related Commands Command
aaa authentication dot1x
dot1x re-authentication
dot1x timeout
Catalyst 3550 Multilayer Switch Command Reference
2-2
Modification
This command was introduced.
Description
Specifies one or more AAA methods for use on interfaces running
IEEE 802.1x authentication.
Enables or disables periodic reauthentication.
reauth-period Sets the number of seconds between re-authentication attempts.
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
OL-8566-02