Copying The Active Ivr Topology; Clearing The Configured Ivr Topology Database; Verifying The Ivr Topology - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Configuring IVR
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
After adding the switch to the IVR topology, you then enable IVR and CFS for the IVR application on
the new switch (see
Configuration using CFS" section on page

Copying the Active IVR Topology

You cannot edit the active IVR topology. However, you can edit the manually configured topology. To
copy the active IVR topology database to the manually configure topology, use the following command
in EXEC mode:
switch# ivr copy active-topology user-configured-topology

Clearing the Configured IVR Topology Database

You can only clear manually created IVR VSAN topology entries from the configured database.
To clear the manually configured IVR VSAN topology database, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# no ivr vsan-topology database

Verifying the IVR Topology

You can verify the IVR topology by using the show ivr vsan-topology command. See
Example
Example 23-1 Displays the Configured IVR VSAN Topology
switch# show ivr vsan-topology
AFID
--------------------------------------------------------------
Total:
Current Status: Inter-VSAN topology is ACTIVE
Last activation time: Sat Mar 22 21:46:15 1980
The asterisk (*) indicates the local switch.
Note
Example 23-2 Displays the Active IVR VSAN Topology
switch# show ivr vsan-topology active
AFID
--------------------------------------------------------------
Cisco MDS 9000 Family CLI Configuration Guide
23-22
the"Enabling IVR" section on page 23-9
23-3.
SWITCH WWN
1 20:00:00:05:30:01:1b:c2 *
1 20:02:00:44:22:00:4a:05
1 20:02:00:44:22:00:4a:07
5 entries in active and configured IVR VSAN-Topology
SWITCH WWN
1 20:00:00:05:30:01:1b:c2 *
and the
23-10).
Purpose
Enters configuration mode.
Clears the previously created IVR topology.
Active Cfg. VSANS
yes yes 1-2
yes yes 1-2,6
yes yes 2-5
Active Cfg. VSANS
yes yes 1-2
Chapter 23 Configuring Inter-VSAN Routing
"Distributing the IVR
Example 23-1
OL-18084-01, Cisco MDS NX-OS Release 4.x
to