Table of Contents
Advertisement
Media Flow Controller and Media Flow Manager Installation Guide
2. Set boot parameters; optionally specify from which location the image boots by default;
there are only two locations to choose from so the options are 1 and 2 for location ID. If
next is used, set the boot location to be the next one after the one currently booted from.
boot
3. View boot parameters.
boot ?
4. View current settings.
show boot
To reboot the system after an upgrade, using the Web interface, go to the System Config >
Reboot page.
Managing Configuration Files
You can save a binary file with all current configuration data that can be used to restore the
system configuration. You can also reset custom configurations to their factory defaults,
upload a saved configuration, and import a configuration from another Media Flow Controller.
To manage configuration files using the CLI:
1. From Configure mode, view configuration file options.
configuration ?
2. View current settings.
show configuration
3. View configuration file viewing options.
show configuration ?
4. Make a configuration file active.
switch-to <filename>
5. Save the current configuration through reboots.
write memory
To upload a text file with CLI commands (executed immediately in the running configuration),
or to enter CLI commands to be executed immediately, using the Management Console, go to
the Setup > Configurations page.
Known Installation Issues
Installation on Dell Equipment
•
During installation of Media Flow Controller Release 2.0.2 onto a Dell computer, the Host
ID is not set properly. If a license, or licenses, for Release 2.0.2 are generated using that
Dell Host ID, and you install a later release, those licenses fail. New licenses using the
new Host ID are required.
This situation does NOT apply to upgrades, only to re-installations.
When installing any release post-Release 2.0.2 on a Dell machine that does not have
Release 2.0.2 installed, the Host ID gets set properly.
{location <location_ID> | next}
CHAPTER 2 Getting Started
Known Installation Issues
23
Advertisement
Table of Contents
