Administering Media Flow Controller Overview; Managing Configuration Files (Web Interface); Figure 31 System Config > Configurations Page Detail (Configuration Files) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)

Administering Media Flow Controller Overview

You can perform standard Media Flow Controller administrative tasks using the Web interface,
also known as the Management Console.
•

Managing Configuration Files (Web Interface)

•
Installing Licenses (Web Interface)
•
Upgrading the System (Web Interface)
•
Rebooting the System (Web Interface)
•
Configuring the Web Interface (Web Interface)
•
Configuring the Web Interface Proxy (Web Interface)
•
Configuring Central Management Console Access (Web Interface)
Managing Configuration Files (Web Interface)
The system can store one or more configuration files on persistent storage with one of the files
is designated as active: the file that configuration is loaded from on boot, and to which
configuration is saved upon a save request. Configuration changes are immediately applied to
the running configuration, but are not made persistent until they are explicitly saved.
To manage configuration files:
•
From the left navigation pane in the System Config tab, select Config Mgmt.
The Configurations page is displayed. See
Figure 31 System Config > Configurations Page Detail (Configuration Files)
152 Administering Media Flow Controller Overview
Media Flow Controller Administrator's Guide
Figure 31.
Copyright © 2010, Juniper Networks, Inc.