Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 259

Understanding J-Web User Interface Sessions
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
You establish a J-Web session with the switch through an HTTP-enabled or
HTTPS-enabled Web browser. The HTTPS protocol, which uses 128-bit encryption, is
available only in domestic versions of the Juniper Networks Junos operating system (Junos
OS). To use HTTPS, you must have installed a certificate on the switch and enabled
HTTPS. See "Generating SSL Certificates to Be Used for Secure Web Access" on page 490.
When you attempt to log in through the J-Web interface, the switch authenticates your
username with the same methods used for Telnet and SSH.
If the switch does not detect any activity through the J-Web interface for 15 minutes, the
session times out and is terminated. You must log in again to begin a new session.
To explicitly terminate a J-Web session at any time, click
J-Web User Interface for EX Series Switches Overview on page 151
Configuring Management Access for the EX Series Switch (J-Web Procedure) on
page 487
Chapter 11: User Interfaces Overview
Logout in the top pane.
155