Configuring System Logging (Web Interface) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
2. To delete a recipient, select a notify recipient and Remove Recipients.
3. Click Save at the top of the page to make changes persistent across reboots.
Add New Notify Recipients
Add recipients for email notifications of fault events. See
To add a notify recipient:
1. Enter this information to the text boxes:
• Email Address—Address of recipient.
2. Select or de-select these options:
• Get Detail—Choose to send this recipient detailed or summarized emails.
• Infos—Choose to send this recipient Info class emails.
• Failures—Choose to send this recipient Failure class emails.
3. Click Add Recipient to complete adding the new notify recipient.
4. Click Save at the top of the page to make changes persistent across reboots.

Configuring System Logging (Web Interface)

Configure logging options. See
page 228
Note! These settings configure the system log (syslog) that records all system activity such as
user logins, configuration changes, and system condition changes. It does not record service
activity or errors. The Media Flow Controller errorlog records service related errors but is
mostly useful for debugging by Juniper Networks Support. Media Flow Controller provides
several service-specific logs, detailed in
To configure logging options:
•
From the left navigation pane in the System Config tab, select Logging.
The Logging page is displayed. See
148 Configuring SNMP, Faults, and Logging (Web Interface)
for more information.
Media Flow Controller Administrator's Guide
Figure
"Media Flow Controller System Logging Overview" on
"Chapter 9, "Media Flow Controller Troubleshooting."
Figure 29.
Copyright © 2010, Juniper Networks, Inc.
28.