Juniper JUNOS OS 10.3 - SOFTWARE Manual page 245

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
OS). To use HTTPS, you must have installed a certificate on the switch and enabled
HTTPS. See "Generating SSL Certificates to Be Used for Secure Web Access" on page 498.
When you attempt to log in through the J-Web interface, the switch authenticates your
username with the same methods used for Telnet and SSH.
If the switch does not detect any activity through the J-Web interface for 15 minutes, the
session times out and is terminated. You must log in again to begin a new session.
To explicitly terminate a J-Web session at any time, click
J-Web User Interface for EX Series Switches Overview on page 145
Configuring Management Access for the EX Series Switch (J-Web Procedure) on
page 495
Chapter 11: User Interfaces Overview
in the top pane.
Logout
149