Set Cli Terminal - Juniper JUNOS OS 10.3 - SOFTWARE Manual

set cli terminal

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
set cli terminal set cli terminal
Copyright © 2010, Juniper Networks, Inc.
set cli terminal terminal-type
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Set the terminal type.
—Type of terminal that is connected to the Ethernet management port:
terminal-type
—ANSI-compatible terminal (80 characters by 24 lines)
ansi
small-xterm —Small xterm window (80 characters by 24 lines)
—VT100-compatible terminal (80 characters by 24 lines)
vt100
xterm —Large xterm window (80 characters by 65 lines)
view
show cli on page 163
set cli terminal on page 161
This command provides no output.
user@host> set cli terminal xterm
Chapter 13: Operational Mode Commands for User Interfaces
161