Set Cli Restart-On-Upgrade - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

set cli restart-on-upgrade

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
set cli set cli
restart-on-upgrade restart-on-upgrade
158
®
OS for EX Series Ethernet Switches, Release 10.3
set cli restart-on-upgrade string (off | on)
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
For an individual session, set the CLI to prompt you to restart the router or switch after
upgrading the software.
—Disables the prompt.
off
on —Enables the prompt.
view
show cli on page 163
set cli restart-on-upgrade on page 158
When you enter this command, you are provided feedback on the status of your request.
user@host> set cli restart-on-upgrade on
Enabling restart-on-upgrade
Copyright © 2010, Juniper Networks, Inc.