Environmental Specifications - Spectra Logic T-Series Spectra T200 User Manual

Environmental Specifications

This section describes environmental specifications for the library. The
library must be installed in a rack to ensure stability. Do not place the rack
on a carpeted floor or anywhere else that poses risk for static discharge that
could damage your library and its drives.
The library must be installed in a standard 19-inch (48 cm) rack to prevent tipping.
Warning
The rack must be located on a level, hard-surfaced floor such as cement or tile.
German: Die Library muss installiert sein, in einem Standard-Rack 48 cm
Ablagerung zu verhindern. Das Rack muss sich auf eine ebene, harte Oberfläche
Stock wie Zement oder Fliese.
The library is equipped with internal fans as well as temperature sensors
that operate the fans as much or as little as is necessary in your data center
environment. These features keep the library's internal temperature within
specifications as long as the data center environment is within
specifications.
When the library is moved from a cold environment to a warm environment, it
Caution
should not be used for at least 24 hours. This adjustment period prevents
condensation damage.
December 2008
Drive Type
SAIT Drives
Standby Mode (Minimum)
Power Consumption (Watts)
Heat Dissipation (BTU/hour)
Read/Write/Seek Mode (Maximum)
Power Consumption (Watts)
Heat Dissipation (BTU/hour)
RXT Drives (RXT Gold media)
Standby Mode (Minimum)
Power Consumption (Watts)
Heat Dissipation (BTU/hour)
Read/Write/Seek Mode (Maximum)
Power Consumption (Watts)
Heat Dissipation (BTU/hour)
Library Specifications
Number of Drives Installed
4 8
320 515
1093 1759
500 825
1708 2817
410 695
1400 2373
510 845
1742 2886
T200, T380, and T680 Libraries
12
710
2425
1150
3927
980
3347
1180
4030
353