Using Ausb Key; Continuing Library Operations While Using A Usb Key - Spectra Logic T-Series Spectra T200 User Manual

U USB K
SING A
A USB key can be used for the following:
One Spectra Logic USB key is shipped with the library, but most types of
USB key work.

Continuing Library Operations While Using a USB Key

Do
Caution
firmware. Updated components automatically reset when updates are complete,
which could interrupt a backup operation.
December 2008
EY
Transferring firmware to the library for updating the library and its
components
Saving the library configuration for future reference
Saving results of traces run on the library and its components
Exporting a BlueScale encryption key for safekeeping
Importing a previously exported BlueScale encryption key
Note: If you are unable to access a USB key connected to the library,
remove it and use a different one. Not all USB keys are
compatible with the library. If the LCM stops responding after
you insert an incompatible USB key, reset it as described in
Resetting the LCM on page
It is safe to continue library operations, such as data backup, while
saving library configurations and other information to a USB key.
It is safe to continue library operations, such as data backup, while
exporting or importing a BlueScale encryption key using a USB key.
It is safe to continue library operations, such as data backup, while
running traces (trace results are the data most often saved to a USB
key).
It is safe to continue library operations, such as data backup, while
copying a firmware package to the library from the USB key.
It is not safe to continue library operations, such as data backup, while
the library is performing a firmware update using a firmware package
previously copied to the library.
not
run backups while the library is
It is not safe to continue library operations, such as data backup, while
restoring the library configuration from a USB key.
252.
performing
updates from downloaded
T200, T380, and T680 Libraries
Using a USB Key
79