Spectra Logic T-Series Spectra T200 User Manual page 69

Message Icons Indicate the status of library components, as described in
the following table. Click the icon to view system messages (see
Messages on page
Icon Description
A check mark ( ) in a
green circle
i
An in a blue circle.
An exclamation point
!
( ) in a yellow triangle.
X
An in a red circle.
Camera icon Indicates that the IP address for the optional BlueScale Vision
camera is set (see
page
and use it to observe the interior of the library over an Ethernet network or
the internet (see
Figure 26 The Status bar showing the Camera icon.
Maintenance icon Indicates that a component has reached its maintenance
threshold. Click on the icon to review the Hardware Health Monitoring
notification and send an AutoSupport log to a contact person (see
Responding to Hardware Health Maintenance Notifications on page
Figure 27 The Status bar showing the Maintenance Required icon.
Last Refreshed The date and time shown after valid as of indicate the last
time that the screen was refreshed. The screen can be set to refresh at
designated intervals (see
can refresh it as needed by selecting the Refresh button.
December 2008
240).
Meaning
System OK.
All system components are functioning correctly.
Information.
is available. Check messages to determine the component.
Attention.
A system component requires attention. Check messages
to determine the component.
Error
. A system component has experienced an error condition.
Check messages to determine the component.
Setting the BlueScale Vision Camera IP Address on
182). Click the icon to launch the web-based Network Camera viewer
Using the BlueScale Vision Camera on page
Note: The Camera icon does not appear on the BlueScale user interface
displayed on the library's touch screen.
Camera icon
Note: The maintenance icon only displays if an HHM threshold has
been reached.
Maintenance icon
An informational message about a system component
Setting the Refresh Rate on page
T200, T380, and T680 Libraries
Understanding the User Interface
Checking
82).
178) or the user
241).
69