Spectra Logic T-Series Spectra T200 User Manual page 167

3. Select Next. The Save Partition screen displays.
4. Review the information on the screen and confirm that all settings are
5. Select Save. The library requires several minutes to store the
6. To configure another cleaning partition, repeat the entire configuration
December 2008
Note: The Save Partition screen on your library may be different from
the one shown in
varies depending on the type of partition you have configured.
Figure 102 The Save Partition screen (cleaning
partition).
correct for this partition's configuration.
If the configuration information is correct, proceed to
If the configuration information is not correct, either:
Select Cancel to configure the partition again from the beginning.
Select Previous to move backward through the configuration
screens until you reach the settings that need correction. Make
any necessary corrections, then select Next to move forward
through the screens and return to the Save Partition screen.
configuration information, after which the Shared Library Services
screen redisplays with the partition you just created added to the list of
partitions.
Figure 103 The Shared Library Services screen
(one cleaning partition configured).
process, beginning with
Configuring a Cleaning Partition
Figure 102. The information on this screen
Configuring a Cleaning Partition on page
T200, T380, and T680 Libraries
Step 4.
164.
167