Spectra Logic T-Series Spectra T200 User Manual page 106

Chapter 5 — Importing, Exporting, and Moving Media
3. From the Partition drop-down menu, select the partition containing the
4. Depending on where the media you want to remove from the library is
5. Remove the TeraPack magazine or RXT media pack from the TAP.
6. Manually raise the TAP door until it latches closed.
7. Select either Continue or Stop Exporting.
8. If you exported media directly from the storage pool, use your backup
106
User Guide
media you want to export, then select Go.
The Import/Export TeraPack Cases screen refreshes to show the current
status of the chambers assigned to the selected partition.
The Import and Export/Exchange buttons on the Import/Export
Note:
TeraPack Cases screen display only if those actions can be
performed given the current inventory for the partition. For
example, if all chambers in a partition are empty, the Export/
Exchange button is not displayed.
located, select the Export/Exchange for either the storage pool or the
entry/exit pool.
The transporter retrieves the media pack from the specified pool and
places it in the TAP. The TAP door opens and a Feedback Required
screen displays.
Note: Close the TAP door firmly, but do not use force to close it.
Select Continue to export another TeraPack magazine or RXT media
pack.
The export process continues automatically as long as there are
media packs left in pool. Simply continue to remove media packs
from the TAP, close the door, and select Continue for each one.
When the all of the media packs in the partition have been exported
or exchanged, the process stops automatically and the user interface
redisplays the Import/Export TeraPack Cases screen.
Select Stop Exporting after you remove the desired media pack from
the TAP if you do not want to export all of the media packs in the
pool.
software to update the media inventory it maintains (see
Media Inventory on page 116).
Updating the
91090000