Configuring Rotation Manager (Optional) - Spectra Logic T-Series Spectra T200 User Manual

C
ONFIGURING
If your site uses NetBackup's Vault Manager, you can purchase the
Rotation Manager option to simplify identifying tapes moved off site. With
Rotation Manager installed, the library sends an email containing the bar
code information for every piece of media and its off-site location to a
specified email recipient.
Administrators can use this email to import identifying information for
every bar-coded cartridge going off site into the backup software. Along
with listing every bar-coded cartridge, the information also lists the bar
code of the TeraPack magazine holding the cartridge, which simplifies
finding groups of cartridges using a single bar code.
After enabling the option as described in
page
1. Log into the library with superuser or administrator privileges.
2. From the toolbar menu, select General > Import Export > Rotation
3. Select the software vendor you are using and the Mail To email address
4. Select Save.
December 2008
R M
OTATION ANAGER
176, use the following steps to configure the Rotation Manager.
Manager. The Rotation Manager Configuration screen displays.
Figure 122 The Rotation Manager Configuration
screen.
to use for sending notifications.
Only previously configured mail recipients are listed. To send the
notification to someone who is not already listed as a library user, you
must first configure that person as an email recipient (see
Mail Users on page

Configuring Rotation Manager (Optional)

(O
PTIONAL
Enabling Purchased Options on
185).
T200, T380, and T680 Libraries
)
Configuring
195