Using Observatory - Spectra Logic T-Series Spectra T200 User Manual

Add Libraries to Observatory
1. Install Observatory on the Windows-based computer that is connected
2. When the software install is complete, Observatory opens in a web
3. Select Login (no password) on the Observatory log in page to access the
4. Select the Setup icon and follow the instructions on the Observatory CD

Using Observatory

When you start Observatory, the Overview screen shows the status of all
libraries being monitored. The individual libraries are grouped by site, in
the center of the Overview screen.
1. Select Login next to the library you want view to establish a remote
2. Enter the appropriate user name and password to log into the library.
December 2008
to the same network as the libraries you want to monitor using
Observatory.
browser.
Overview page.
jacket to add the libraries you want to monitor using Observatory.
Note:
You can run no more than two simultaneous Observatory
sessions.
Figure 123 The Observatory Overview screen.
connection to the library and display the library's login screen.
Configuring and Using Observatory (Optional)
T200, T380, and T680 Libraries
197