Configuring A Firmware Package Server - Spectra Logic T-Series Spectra T200 User Manual

4. If the email attachment does not contain the configuration files or one
C
ONFIGURING A
You can choose to set up and use one or more local servers to store library
firmware packages downloaded from Spectra Logic. Using a firmware
package server may be useful for the following types of situations:
Use the following steps to configure, modify, or delete a local package
server.
1. Identify the server or servers you want to use for storing Spectra Logic
2. Log into the library with superuser or administrator privileges.
3. Select Maintenance > Package Update. The Package Update screen
December 2008
or more files are 0 bytes in size, repeat the backup process
Backup of the Library Configuration on page
again.
F P
IRMWARE ACKAGE
Note: For additional information about firmware packages and how to
use them, see Updating Library Firmware on page
If you have multiple Spectra libraries to update.
If you need to keep local, in-house copies of all firmware packages that
have been (or will be) installed in your library.
library firmware packages. Make sure that these servers can access the
Internet and that they are on the same network as the libraries you want
to update.
Note: Both Microsoft's Internet Information Services (IIS) and the
Unix-based Apache server work as package servers.
displays.
Figure 120 The Package Update screen.

Configuring a Firmware Package Server

191) to send the email
S
ERVER
T200, T380, and T680 Libraries
(Manual
298.
193