Spectra Logic T-Series Spectra T200 User Manual page 157

Configure the Drives and Chambers for the Partition
1. From the Robotic Control Path screen, select Next. The Chambers and
2. Enter the following information in the Chambers and Drives screen:
Do not mix multiple generations of the same technology (for example, LTO-3 and
Caution
LTO-4) in the same partition. The media used by different generations may not be
compatible (for example, see
December 2008
Drives screen displays.
Figure 89 The Chambers and Drives screen
(direct-attach Fibre Channel).
Storage Chambers – The number of storage chambers to assign to
the storage pool for this partition.
EE Chambers – The number of chambers to assign to the entry/exit
pool for this partition.
Note: For each partition configured in the library, you must designate a
minimum of one chamber for the storage pool and one chamber
for the entry/exit pool.
Drives – Select the drives to be dedicated to this partition. The check
boxes for any installed drives that cannot be used in the partition
are grayed out.
LTO Read/Write Compatibility on page
T200, T380, and T680 Libraries
Creating a New Data Partition
359).
157