Spectra Logic T-Series Spectra T200 User Manual page 145

Configure User Access
1. From the Chambers and Drives screen (or the Encryption screen), select
2. Select the users who are allowed access to this partition. Only users that
3. Proceed to
Configure Visibility
Visibility determines whether one or both of the interface ports on the
F-QIP provide the robotic control path and access to the drives controlled
by the QIP.
1. From the Partition Users screen, select Next. The Robotic Path Visibility
December 2008
Next. The Partition Users screen displays.
Figure 77 The Partition Users screen (F-QIP).
have previously been configured (see
page 171) can be selected.
Configure
Note: If you are using direct-attach Fibre Channel drives, the F-QIP
only provides the robotic control path.
screen displays.
Figure 78 The Robotic Path Visibility screen
(F-QIP).
Configuring Library Users on
Visibility.
T200, T380, and T680 Libraries
Creating a New Data Partition
145