Turning The Library On And Off - Spectra Logic T-Series Spectra T200 User Manual

4. Select
T
URNING THE
Before powering on the library, make sure that one or both of the library's
power cables are plugged into AC outlets and the main power switch
above each AC connector on the back of the library is set to the on position
(see
the library's power supplies. They do not apply power to the individual
library components such as the drives and the transporter.
The power to the individual library components is supplied by the power
supply modules, which are controlled by the library's front panel power
button.
December 2008
Go . The Storage Density screen showing the selected metrics
displays.
Figure 33 The Storage Density metrics screen.
L O
IBRARY N AND
Figure 14 on page
Note: The power button controls the power supplies which provide
DC power to the library components. The AC power switches on
the back of the library control the AC power supplied to the
power supplies.
O
FF
38). These switches control the AC power input to
T200, T380, and T680 Libraries

Turning the Library On and Off

77