Spectra Logic T-Series Spectra T200 User Manual page 179

Enabling Metrics Monitoring
Before you can use the library's metrics options for monitoring the
operation of your library and its drives, you must enable them.
1. Log into the library with superuser or administrator privileges.
2. From the toolbar menu, select Configuration > System. The System
3. Scroll down to the Other Settings pane.
4. To enable a feature, select the check box next to the feature, then select
December 2008
Setup screen displays
Figure 111 The System Setup screen (Other
Settings).
Save.
Drive performance – The Drive Performance Monitor allows you to
monitor the performance of your drives.
Note: Make sure that the drives do not contain media before you
enable Drive Performance monitoring. If you enable this option
when a drive contains a cartridge, the drive is reported as empty.
Power consumption – The Power Consumption Monitor allows you
monitor the amount of power your library is using.
Note: When you disable and then re-enable power consumption
monitoring, the library does not begin capturing data again until
you p
ower cycle the library.
Modifying the Library Configuration Settings
(Figure 104 on page 170).
T200, T380, and T680 Libraries
179