Spectra Logic T-Series Spectra T200 User Manual page 297

2. Reach in and remove the old air filter from the inside of the filter cover.
3. Place the new air filter against the inside of the fan cover so that it fits
4. Push the top edge of the cover toward the front panel until the magnets
December 2008
Discard the filter.
Air filter
Figure 188 Replace the air filter.
between the tabs (shown in
secure it to the front panel.
Push inward
Figure 189 Install the filter cover.
Note: Clean the tape drives. After replacing the filter, Spectra Logic
recommends cleaning all of the tape drives in the library (see
Manually Cleaning a Tape Drive on page
Figure 187 on page 296).
309).
T200, T380, and T680 Libraries
Replacing the Air Filter
297