Spectra Logic T-Series Spectra T200 User Manual page 139

6. Select Next to advance through the remainder of the screens without
7. Review the information on the screen and confirm that all settings are
8. Select Save. The library requires several minutes to store the
December 2008
making any additional changes until you reach the Save Partition
screen.
Note: The Save Partition screen on your library may be different from
the one shown in
varies depending on the type of partition you have configured.
Figure 72 The Save Partition screen.
correct for this partition's configuration.
If the configuration information is correct, proceed to
If the configuration information is not correct, either:
Select Cancel to configure the partition again from the beginning.
Select Previous to move backward through the configuration
screens until you reach the settings that need correction. Make
any necessary corrections, then select Next to move forward
through the screens and return to the Save Partition screen.
configuration information, after which the Shared Library Services
screen redisplays.
Note: When you make a change to a partition, the library generates an
auto-configuration file and saves it to the LCM compact flash. If
you configured the auto-save email option, an email containing
the updated library configuration and the MLM data base will
be sent to the specified recipient (see
Automatic Configuration Save File on page
Modifying an Existing Partition
Figure 72. The information on this screen
Enabling Email for
T200, T380, and T680 Libraries
Step 4.
187).
139