Spectra Logic T-Series Spectra T200 User Manual page 310

Chapter 13 — Maintaining the Library & Drives
5. Check the Drive Information screen to confirm that the cleaning was
6. If you have additional drives to clean, repeat Step 3 through Step 6 for
7. If you do not store the cleaning cartridge in the library, export the
8. Make sure you track the number of times the cleaning cartridge has
Cleaning Partition Present
Before you can use the Automatic Drive Cleaning feature to manually
clean a drive, a cleaning partition must be associated with the data
partition containing the drive and a cleaning cartridge must be available in
the cleaning partition. See
information about configuring a cleaning partition.
1. Log into the library.
2. Select Configuration > Drives. The Drives screen displays.
310
User Guide
successful.
If the cleaning cartridge was expended before the cleaning started, the
tape drive automatically ejects the cartridge and does not perform the
cleaning. The Drive Details screen will still indicate that the drive needs
cleaning. If a drive still needs cleaning, perform the following steps:
a. Export the expended cleaning cartridge.
b. Import a new cleaning cartridge.
c. Repeat Step 3 through Step 6 to clean the tape drive.
each drive.
magazine containing it, as described in
on page 104.
been used (see Tracking Cleaning Cartridge Use on page
Figure 204 The Drives screen.
Exporting or Exchanging Media
Configuring a Cleaning Partition on page 164
311.
for
91090000