Spectra Logic T-Series Spectra T200 User Manual page 272

Chapter 11 — Library Troubleshooting
4. Select the type of library you want to emulate:
5. Select Next. The Robotic Control Path screen displays listing the QIPs
272
User Guide
Select a preconfigured emulation from the Use preset drop-down
list
Create a custom emulation. Select User Define, then enter the
Vendor and Model in the appropriate fields.
Note: Spectra Logic recommends using the preset SPECTRA
PYTHON.
and/or direct-attach drives currently installed in the library.
This is the beginning of the series of configuration screens. The
sequence of steps and screens matches those described in
New Data Partition on page 140.
Creating a
91090000