Modifying The Library Configuration Settings; Changing The Library Name - Spectra Logic T-Series Spectra T200 User Manual

M
ODIFYING THE
This section describes how to modify the library's general configuration
settings in the Other Settings pane of the System Setup screen. To change
the current value for any of these settings, access the System Setup screen
(see
the Other Settings pane.

Changing the Library Name

The library name is used to identify the library in messages it sends to mail
recipients.
1. Type a name for the library in the Library Name field. Use a name that
2. Select Save.
December 2008
L C
IBRARY ONFIGURATION
Accessing the System Setup Screen on page
Figure 110 Other Settings pane of the System
Configuration screen
will help identify the library to a remote user.

Modifying the Library Configuration Settings

S
ETTINGS
170), then scroll down to
T200, T380, and T680 Libraries
177